Table of Contents
Advertisement
4 If the requested wake-up time is acceptable, click Autotmatic Wake Up
again, then click Release.
The Release indicator goes on; you are free to process other calls.
5 If the initial request was not accepted, the next available time is
displayed. Enter the new time, click Automatic Wake Up, then click
Release.
The Release indicator goes on. You are free to process other calls.
Note: If the requested wake-up time is not acceptable to the
system, the display shows alternative wake-up times in this order:
5 minutes earlier than the requested time; 5 minutes later than the
requested time; the first available 5-minute interval before the
requested time.
Canceling a wake-up call
Use this procedure to cancel a wake-up call that has already been
entered into system memory.
1 A hotel guest calls to request that a wake-up call be cancelled. Click
Automatic Wake Up. [If the displayed number is not the number requiring
cancellation of the wake up call, dial the proper number.]
The Automatic Wake Up indicator goes on.
2 Click #, then click Automatic Wake Up again. [If the indicator flashes
quickly, no wake-up call was found for the dialed number. Click Automatic
Wake Up again.]
The Automatic Wake Up indicator goes off; the wake-up request is
canceled.
3 Click Release to end the procedure.
The Release indicator goes on; you are free to process other calls.
Meridian 1 Attendant PC features
Meridian 1 Attendant PC Software User Guide
Page 109 of 160
Advertisement
Table of Contents
