Diagnosis Menu Options - Nortel Meridian Companion PCI User Manual

Figure 11: Diagnosis Text
Q
uality of Service
S
ystem Faults
R
adio Signals
C
ell Signals
I
nterference
T
raffic
CSC
GoBack

Diagnosis Menu Options

P0886303 Issue 01 Standard
DIAGNOSIS
U
sage
1 ALARM and 0 WARNINGS have been detected.
The cell edge RSSI used in the diagnosis is -70 dBm.
The results of the diagnosis are stored in REPORT.TXT.
Press F6 to return to diagnosis display.
Exit
Esc F1 F2 ^F3
Note: The CDS Automatic System Diagnosis carries out diagnosis
on all available samples. For sample sizes less than 100, the
amount of data is insufficient for meaningful diagnosis and no
warning is issued.
Note: For every alarm and warning, you should consult Appendix B
for more details.
In most cases the Automatic System Diagnosis will meet your needs.
However, if you need detailed statistics on a particular aspect of
system operation, you can access the level 2 commands available
under the Diagnosis menu. A series of diagnosis charts and tables is
available, showing various operating statistics.
1 Alarm(s) 0 Warning(s)
System Faults
ALARM C202
Evaluation: Base Station 0106 reset 1 time.
The reset was softtrap 703.
Action: Refer to Appendix in the CDS User Guide.
DIAGNOSIS SUMMARY
Display
F4 F5 F6 F7
Companion Diagnostic Software for PCI User Guide
Display screens 49
Up Down
F8 F9 F10 ^Brk