Nortel Meridian Companion PCI User Manual page 112

Appendix B 107
ALARM C203
Evaluation Base Station <Base Station number> reset
<count> time(s). The last reason was
FC: <function code>,
AA: <access address>,
IR: <instruction reg>,
SR: <status reg>,
PC: <program counter>
Description A hardware problem has occurred in this Base Station.
It could be caused by power fluctuations on the line, static discharge,
or faulty Base Station hardware. The Base Station is still operational
but the wireless system supplier should be contacted.
Action Record the values that appear in the Evaluation and contact
the wireless system supplier.
ALARM C220
Evaluation Radio <radio number> reset <count> time(s).
The reset counts are
RR: <RIM reset count>,
SCL: <SCL fault count>,
Mem: <memory fault count>,
SF: <sanity failure count>,
SS: <station set reset count>,
DF: <download fault count>,
Hlt: <halt count>
Description This alarm occurs when a radio resets four or more
times or when <halt count> is one. There are seven causes of
radio resets. They are described below in the actions section.
Action The action taken depends on the source of the radio reset.
Each radio reset type with a count greater than zero should be
checked in the following list, and the action corresponding to that
reset type should be taken.
P0886303 Issue 01 Standard Companion Diagnostic Software for PCI User Guide