Remote Access Connections Using A Rad External Modem - Nortel Meridian Companion PCI User Manual

Remote access connections using a RAD external modem

Figure 3: Overview of CDS remote connections using a RAD external modem
CDS Application
Companion
Diagnostic
Software
PC
Keyboard
modem
Public
Switch
Line
P0886303 Issue 01 Standard
To examine a wireless system using CDS from a remote location via
a RAD external modem, no line into the controller is dedicated to the
RAD. A line connects the RAD external modem directly to the
public switch or Private Branch Exchange (PBX), bypassing the
Controller. The PC dials the telephone number assigned to this line.
The external modem is connected to the RAD by an RS232 null
modem cable. See Figure 3 for the connections you must make to
examine a wireless system using CDS from a remote location using
a RAD external modem.
Note: Only 9600 baud can be supported with the external modem.
Companion 200
Meridian Companion
Public
Switch
or
PBX
Access
Lines
RS232
Cable
(max.
100 ft)
Public
PC
Switch
or
PBX
Public Switch
Companion Diagnostic Software basics 13
TCM
lines
Controller
RAD
External
Modem
or PBX Line
Companion Diagnostic Software for PCI User Guide
Base Stations Portables
Distribution Administration
Block Terminal
(M7310)
RAD
TCM
Cable
RAD
RS232 Null
Modem Cable