Nortel Meridian Companion PCI User Manual page 140

Sitename
# Equivalent to the interactive CDS prompt for the site name. RUNCDS will provide
# itself with site names by looping through the site names in SITE001.TXT.
$Dataset1
# Open dataset number one for the sitename (i.e. use the first stored dataset).
Diagnosis
# Access Main Menu option "Diagnosis". Automatic system diagnosis will be done.
# CDSPCI\<sitename>.SIT\REPORT.TXT will contain the text output
for the current site.
Exit
# End of macro for this site. Go to the next site if there is one.
P0886303 Issue 01 Standard
above (see the 'Utilities' section in this manual for details about the
CDS file system).
Example 3.
To perform a diagnosis on dataset number one enter the following
into a file called MACRO3.TXT :
To execute this macro language file on the sites in the
SITE001.TXT file, enter the following command line:
Command line: RUNCDS -s1 MACRO3
The '-s1' parameter instructs RUNCDS to access the
SITE001.TXT file for the site names. The 'MACRO3' parameter
instructs RUNCDS to run the macro language program stored in the
file MACRO3.TXT.
Companion Diagnostic Software for PCI User Guide
Appendix D 135