1-2-1. Side Cabinet
1. Remove the hook while pushing down the portion A and then portion B of the front cabinet in the
direction of the arrow .
2. Hold the portions C of the side cabinet (right side), then remove it in the direction of the arrow .
3. Remove the side cabinet (left side) in the same procedure as steps 1 and 2.
Hooks
Side cabinet
(left side)
Hook
Side cabinet (left side)
Side
cabinet
(right side)
Hook
Front cabinet
4. To install, reverse the removal procedure.
m
. Be sure that the clearances between the side cabinet and camera cabinet should be even in right side
and left side.
. If the right and left clearances are not even, adjust them by loosening the setscrews of the tilt motor.
. When the setscrews of the tilt motor are loosened, tighten them to the tightening torque as described
below.
Tightening torque: 0.6 ?0.02 N.m
1-2
Camera cabinet
Side cabinet
Tilt motor
Setscrews
Front
cabinet
Hook
Clearances
Side cabinet
Camera cabinet
Hooks
Side cabinet
(right side)
Side cabinet (right side)
Portion C
Portion C
Portion A
Portion B
Hook
Front
cabinet
EVI-HD7V