Nortel 6140 Getting Started page 8

If you want to Then
Answer a telephone
call during a PTT
transmission
Start a telephone call
during a PTT
transmission
Turn off PTT Change to a different profile (Silent and Vibrate
Subscribe to
additional PTT
Channels
Chargers
Three Charger models are available for the WLAN Handset 6120 and
6140. The Single Charger will charge a single Handset with an installed
Battery Pack. The Dual Charger will charge the Handset and a spare Bat-
tery Pack. The Quad Charger can charge up to four Battery Packs at a
time. Any Nortel 6100 Series Battery Pack can be charged in any Charger.
The Single and Dual Chargers allow the Handset to remain operative in
speakerphone mode or with a headset while charging. Handsets may be
charged while in standby mode, while in an active call or while turned off.
Place the Single or Dual Charger on a flat, horizontal surface. Plug the
power supply into the Charger and into an appropriate wall outlet. The
Quad Charger may be mounted on a horizontal or vertical surface.
8
Press the START key. PTT transmissions will
be pre-empted by the telephone call.
Press the START key and dial the number.
PTT transmissions will be pre-empted during
the telephone call.
disable PTT by default) or unsubscribe from all
PTT channels.
Press Cfg to open the Config Menu and select
Push-to-Talk.
Select Subscribed Channels and then select
the channels you want to add. Subscribed
channels are marked with an asterisk (*).
English