Nortel 6140 Getting Started page 6

If you want to Then
Place a call on hold Press FCN and then press the Hold softkey.
Resume a held call Press the LINE key followed by the line number
End the call Press the END key. Be sure to do this at the
Change the speaker
volume
Change the ring
volume
Stop the ringing Press the END key to silence the ring.
Activate or deactivate
the speakerphone
Display additional
features
Change the profile Press the Prof softkey and use the Nav keys to
Turn on the backlight The backlight comes on when any key is
6
key.
end of each call to return to the standby mode.
Press the volume up/down buttons on the side
of the Handset during the call.
Press the volume up/down buttons on the side
of the Handset during ringing.
During a call, press FCN and then press the
Spkr softkey and speak towards the Handset.
Press the Actv softkey to display a list of
features and available softkeys.
During a call press the FCN key to display a list
of available features and call-handling softkeys.
select a different profile. The selected profile is
marked with an asterisk (*).
pressed or when there is an incoming call and
stays on for 10 seconds. It turns off after 10
seconds if another key is not pressed within
that period.
English