Structure Of Pages - Konica Minolta AeroDR SYSTEM Operation Manual

Structure of pages

(1)
(2)
(3)
(4) (4)
(5)
Number Item
(1) Item heading
(2) Operation procedure
(3) Important items
(4) Hint
(5) Reference
Example of page structure
1.1 Operation of DR Detector
1.1.1 Exposure
Exposure with this device is performed with the follow-
ing procedure.
1
Perform examination registration with the
image processing controller.
2
Check that this device is ready to expose
images, and then prepare for the expo-
sure.
3
Push the exposure switch of the X-ray de-
vice to perform the exposure.
• When the exposure is completed, images are
stored in the DR Detector and will then be con-
verted to digital data and sent to the image pro-
cessing controller sequentially.
4
Check that the exposed image is dis-
played on the image processing control-
ler.
• • • • • • • • • • • • • • • • • • • ••• •••• ••••• ••••••
IMPORTANT
• The side with the mark is the exposure surface.
• When exposing in landscape, the direction of the
mark is set according to exposure environment.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • ••• ••• ••••• ••••••• •
HINT • • • • • • • • • • • • • • • • • • • ••• •••• ••••• ••••••
• If the DR Detector remains unused for a long time it
transitions to the sleep mode.
• When the image processing controller is ready to ex-
pose, it recovers from the sleep mode.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • ••• ••• ••••• ••••••• •
Reference • • • • • • • • • • • • • • • • • • • ••• •••• ••••• ••••••
• Regarding the operation of the image processing con-
troller, refer to the "Operation Manual" of the image
processing controller.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • ••• ••• ••••• ••••••• •
Describes the titles of described content.
The operating procedure is described in sequential numerical
steps.
Describes the important items for operation. Be sure to read
them.
Describes important information.
Describes reference items. Refer to these as necessary.
1.1.2 DR Detector orientation
Change the orientation of the DR Detector according
to the exposure body part.
Expose with the mark upward when exposing in por-
trait, and with the mark to the side when exposing in
landscape.
z When exposing in portrait
The mark is upward
X-ray
X-ray device
z When exposing in landscape
The mark is to
X-ray
the left or right
X-ray device
00
Description
11
Introduction
Icon
-
-
IMPORTANT
HINT
Reference