Aerodr Battery Charger2 - Konica Minolta AeroDR SYSTEM Operation Manual

2 .2 .13 AeroDR Battery Charger2

The component names and functions of the AeroDR Battery Charger2 are as follows.
(9) Rear insert
guide
(10) Rear cover
(12) DR Detector insert table
(11) Side cover (left)
Number Name
(1) Connector cover
(2) Wired connection connector
(3) Front insert guide
(4) Stand
(5) Front cover
(6) Side cover (right)
(7) Power switch
(8) Inlet
(9) Rear insert guide
(10) Rear cover
(11) Side cover (left)
(12) DR Detector insert table
(13) LEDs
(14) LAN connector
(1) Connector cover
(2) Wired connec-
tion connector
(3) Front insert
guide
(4) Stand
(5) Front
cover
(13) LEDs
Protects the wired connection connector and prevents dust from entering
inside it.
Connects to the wired connection connector of the DR Detector.
Protects the internal parts.
Protects the AeroDR Battery Charger2 from being overturned.
Protects the internal parts.
Protects the internal parts.
Used to turn the AeroDR Battery Charger2 on/off.
Connects to the power cable of AeroDR Battery Charger2.
Protects the internal parts.
Protects the internal parts.
Protects the internal parts.
A guide for inserting the DR Detector.
Indicate the status of the DR Detector and AeroDR Battery Charger2.
Connects to the Ethernet cable.
55
2.2 Component names and functions
(6) Side cover (right)
(7) Power
(8) Inlet
(14) LAN connector
Functions
switch