Warning Level Setting - Konica Minolta CM-M6 Instruction Manual

Warning Level Setting

… „
Warnings are displayed when measurement data nears the tolerance. Users can set how close to the tolerance the
data must be before a warning occurs.
Operating Procedure Start the procedure from the <Target menu> - <Pass/Fail> screen.
1
Use [] or [] to move the cursor to "Warning
level", and then press the [Confirmation] key.
The <Warning level> screen is displayed.
2
Use [] or [] to change the value.
Settings
000 to 100%
{ „
3
Press the [Confirmation] key after completing the
changes.
The setting is confirmed and the screen returns to the
<Pass/Fail> screen.
If [ESC] is pressed during configuration, the settings will
Notes
not be changed and the screen will return to the <Pass/
Fail> screen.
Target
Target menu [0002]
Pass/Fail
Edit tolerance
Warning level
80%
Parametric coef.
Target
Target menu [0002]
Pass/Fail
Warning level
Edit tolerance
Fail
Warning level 0 8 0
%
80%
Pass
Parametric coef.
3
56