Aerodr Generator Interface Unit - Konica Minolta AeroDR SYSTEM Operation Manual

2 .2 .9 AeroDR Generator Interface Unit

The component names and functions of the AeroDR Generator Interface Unit are as follows.
(1) Top cover
(5) Front cover
Number Name
(1) Top cover
(2) Side cover
(3) Rear cover
(4) Exhaust outlet
(5) Front cover
(6) LEDs
(7) Cable outlet
(8) Spacer
(9) Hand switch
(9) Hand switch
(2) Side cover
(6) LEDs (7) Cable outlet
Protects the internal parts.
Protects the internal parts.
Protects the internal parts.
Exhausts internal heat.
Protects the internal parts.
Indicate the status of the AeroDR Generator Interface Unit.
Outlet for various cables.
Prevents exhaust outlet from being blocked after installation.
When S-SRM connection is adopted, a hand switch is installed in the AeroDR
Generator Interface Unit.
51
2.2 Component names and functions
(4) Exhaust outlet
(3) Rear cover
(8) Spacer
Functions