Battery Warnings - Konica Minolta CR-20 Instruction Manual

Handling the Instrument

Battery Warnings

This instrument can be powered by AA batteries (alkaline batteries or nickel-metal hydride rechargeable batteries).
When the instrument is operating on battery power, the battery mark will appear on the LCD screen showing one of two levels according to the battery consumption.
The battery mark will not be shown if the batteries have suffi cient power.
Battery mark Status
Batteries are The system will fail if the batteries are not replaced
depleted immediately.
(The power will turn OFF automatically 5 seconds
after the "Low Battery" message appears.)
Remaining battery If this mark is displayed, measurement can be
power is low continued temporarily, but new batteries should be
installed as soon as possible.
None Batteries are full Shows that the remaining battery power is suffi cient.
Memo The display will not be shown when the power is OFF.
The display will not be shown when power is supplied through the AC adapter or
USB bus power.
(Cont.)
Low remaining battery power mark
Description
21