Web Configuration Pages Definitions; Status Page Definitions - Grandstream Networks HT813 Administration Manual

Web Configuration Pages Definitions

This section describes the options in the HT813 Web UI.
STATUS: Displays the system info, network status, account status, and line options.
BASIC SETTINGS: Configures the end user level password, IP address modes, web access, time zone settings and
language.
ADVANCED SETTINGS: Configures networks, upgrading and provisioning, TR-069, security settings, date and time,
SNMP, syslog, audio settings, call settings and call progress tones.
FXS PORT: Configures SIP accounts settings.
FXO PORT: Configures SIP accounts settings.

Status Page Definitions

Status
Shows devise ID in hexadecimal format. This is needed by network administrators for troubleshooting. The
MAC address will be used for provisioning and can be found on the label on the original box and on the label
located on the bottom panel of the device.
MAC
Note: The device has two MAC addresses, one for the WAN port and one for the LAN port. The MAC address
Address
located on the bottom panel of the device is the MAC address of the LAN port. The MAC address of the WAN
port is the MAC address of LAN port +1.
Example: MAC Address: WAN - "00:0B:82:25:AF:32", LAN - "00:0B:82:25:AF:31".
WAN IPv4
Displays assigned IPv4 address.
Address
WAN IPv6
Displays assigned IPv6 address.
Address
Product
Displays product model info. Default is HT813.
Model
Hardware
Displays the hardware revision information and the part number.
Version
Software
● Bootloader: Specifies Boot version.
Version
Figure 8: Web HTTP(S) Port