1. Access your HT813 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings
5. Confirm the new end-user password.
6. Press Apply at the bottom of the page to save your new settings.
Changing Viewer Password
1. Access your HT813 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings
5. Confirm the new viewer password.
6. Press Apply at the bottom of the page to save your new settings.
Changing HTTP/HTTPS Web Port
1. Access your HT813 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings
5. Make sure that the Web Access Mode is set to HTTP(S).
6. Change the current port to your new HTTP(S) port. Ports accepted are in range [1-65535].
7. Press Apply at the bottom of the page to save your new settings
New End User Password and enter the new end-user password.
Figure 6: User Level Password
New Viewer Password and enter the new viewer password.
Figure 7: Viewer Level Password
HTTP(S) Web Port.