Basic Settings Page Definitions - Grandstream Networks HT813 Administration Manual

● Core: Specifies Core version.
● Base: Specifies Base version.
● Prog: Specifies Program version. This is the main firmware release number, which is always used for
identifying the software system of the HT813.
● CPE: Specifies CPE version. The CPE version is displayed only when HT813 is connected to an ACS using
the TR-069 protocol.
Software
Indicates the current software status of the HT (Running or Stopped).
Status
System Up
Indicates actual system time and uptime since last reboot.
Time
PPPoE
Indicates PPPoE connection status.
Link Up
NAT Indicates type of NAT when it is configured.
Individual
Certificate Indicates the current individual Certificate Generation.
Generation
Displays relevant information regarding the FXS and FXO ports about their registration, current status and
Port Status
their appropriate User ID.
Port
Displays relevant information regarding the FXS and FXO ports about their DND and call forward features.
Options
Provision Displays provisioning status.
Core Dump Provides generated core dump file if unit malfunctions. Clean will be displayed if no issues.

Basic Settings Page Definitions

Basic Settings
New
End
Configures user level password.
User
Case sensitive and max. Length of 25 characters.
Pass
word
Confi
rm
End
Re-enter the end user password to confirm the change of user password on the web GUI to avoid typos or mistakes.
User
Pass
word
New
View
Configures viewer level password.
er
Case sensitive and max. Length of 25 characters
Pass
word
Confi Re-enter the viewer password to confirm change viewer password on web GUI to avoid typo or mistakes.
rm