Reset To Factory Settings; Manual Configuration - Grandstream Networks HT-701 Configuration Manual

Reset to factory settings

This step is not required for brand new out-of-the-box devices, however, if the device has been
already used then it is a must.
Open a new browser window and enter your device IP address in order to access the web
administration interface login screen. Example: http://192.168.1.22.
Login to web administration interface with your password. Please note, factory default
password is admin.
Click on Basic Settings tab.
In the Reset Type field select Full Reset.
Click Reset button.
Wait sometime prior for device to reboot.
NOTE: Do not unplug or remove power to the device while it is updating firmware and
configurations.

Manual Configuration

1. Login to your device web administration interface
Open new browser window and enter ATA IP address, for example 192.168.1.57
Login to web administration interface by entering password (default password for
Grandstream web administration is: admin).
Navigate to FXS Ports tab.
Enter or set the following details into the respective fields.
Primary SIP Server
- Enter the Hostname or IP Address of the PBXware in the Primary SIP Server
field.
- Example for Hostname: voip.bicomsystems.com