Grandstream Networks HT813 Administration Manual page 20

File using OpenSSL.
Password
HTTP/HTT
PS/FTP/FT
Enters user name to authenticate with HTTP/HTTPS/FTP/FTPS server.
PS User
Name
HTTP/HTT
PS/FTP/FT
Enters password to authenticate with HTTP/HTTPS/FTP/FTPS server.
PS
Password
Firmware Checks if firmware file is with matching prefix before downloading it. This field enables user to store different
File Prefix versions of firmware files in one directory on the firmware server.
Firmware Checks if firmware file is with matching postfix before downloading it. This field enables user to store
File Postfix different versions of firmware files in one directory on the firmware server.
Config File Checks if configuration files are with matching prefix before downloading them. It allows user to store
Prefix different configuration files in one directory on the provisioning server.
Config File Checks if configuration files are with matching postfix before downloading them. It allows user to store
Postfix different configuration files in one directory on the provisioning server.
Allow users to configure variables on the configuration server path to differentiate the
directories on the server.
Enable
Example: When provisioning, a user can define the mac address and IP address when sending the HTTP Send
Using tags
request link in the following form "192.168.5.96:8060/?mac=[MAC]&lan_ip=[IP]", the link will look like this
in URL
example : http://192.168.5.99/mac=000b89a9064&lan_ip=192.168.5.99/cfg.xml
Default Value is "No".
Always sen
Determines whether to send basic HTTP authentication information to the server by default when using a
d HTTP
"Wget" request to download firmware or configuration files. If set to "Yes", it will send HTTP/HTTPS user name
Basic
and password no matter whether the server needs authentication or not. If set to "No", only send HTTP/HTTPS
Authenticat
user name and password when the server needs authentication.
ion
Set to "No" by Default.
Information
Allow
DHCP
Obtains configuration and upgrade server's information using options 66 from DHCP server.
Option 66
Note: If DHCP Option 66 is enabled, the HT813 will attempt downloading the firmware file from the server URL
or 160 to
provided by DHCP, even though Config Server Path is left blank
Override
the Server
Additional
Allows users to enable the Additional Override DHCP Option in Option 150.
Override
DHCP The default value is "None"
Option
3CX Auto Sends multicast "SUBSCRIBE" message for provisioning at booting stage, used for PnP (Plug-and-Play)
Provision configuration. Default is Yes.
Automatic Specifies when the firmware upgrade process will be initiated; there are 4 options:
Upgrade
● No: The HT813 will only do upgrade once at boot up.
● Check every X minutes: User needs to specify a period in minutes.
● Check every week: User needs to specify "Day of the week (0-6)". (Day of week is starting from Sunday).
● Check every day: User needs to specify the start hour and the end hour of the day (0-23).
Default is No.