Grandstream Networks HT813 Administration Manual page 14

View
er
Pass
word
Web/SSH Access
Web
Sess
Configure timer to log out web session during idle.
ion
The default is 10 min. The range is 2-60 min.
Time
out
Web
Acce
ss Configure attempt limit before lockout.
Atte Default is 5. Range is 1-10.
mpt
Limit
Lock
out
If the login attempt failed 5 times, the login would be locked out for the time length.
Time
Default 15 mins. Range 1-60 min.
Inter
val
Web
Acce
Allows users to choose the Web Access Mode between HTTPS and HTTP. If HTTPS is selected, web UI will be
ss
accessed using HTTPS. Default is HTTP.
Mod
e
HTT
P
Customizes HTTP port used to access the HT813 web UI. Default is80.
Web
Port
HTT
PS
Customizes HTTPS port used to access the HT813 web UI. Default is443.
Web
Port
Disa
Enables/disables SSH access. The default is No (disabled).
ble
SSH
SSH
Allows users to self-configure SSH Port number. By default, the port number is 22.
Port
Disa
ble�
Enables/disables the Telnet access. The default is Yes (disabled).
Teln
et
Teln
Allows users to self-configure Telnet Port number. By default, the port number is�23.
et
Port
WAN Enables/Disables the Web and SSH access through the WAN port. The available options are the following:
Side
1. No: No access to the web or SSH from any IP address on the WAN side.
Web/