Configuration Guide; Configuring The Ht701 Through Voice Prompts; Configuring The Ht701 Via Web Browser - Grandstream Networks HT701 User Manual

C
ONFIGURATION

Configuring the HT701 through Voice Prompts

DHCP M
ODE
Select voice menu option 01 to enable HT701 to use DHCP.
STATIC IP M
ODE
Select voice menu option 01 to enable HT701 to use STATIC IP mode, then use option 02, 03, 04, 05 to
set up IP address, Subnet Mask, Gateway and DNS server respectively.
F S IP A
IRMWARE ERVER DDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
C S
ONFIGURATION ERVER
Select voice menu option 14 to configure the IP address of the configuration server.
U P
PGRADE ROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP and HTTP.
F U M
IRMWARE PGRADE ODE
Select voice menu option 17 to choose firmware upgrade mode among the following three options:
1) always check, 2) check when pre/suffix changes, and 3) never upgrade
.

Configuring the HT701 Via Web Browser

HT701 has an embedded Web server that will respond to HTTP GET/POST requests. It also has
embedded HTML pages that allow users to configure the HT701 through a web browser such as
Microsoft's IE, AOL's Netscape or Mozilla Firefox installed on Windows or Unix OS. (Macintosh OS is not
included).
Access the Web Configuration Menu
1. Find the IP address of the HT701 using voice prompt menu option 02.
2. Open a web browser, type the IP address. You will see the log in page of the device.
Note:
The IVR announces 12 digits IP address, you need to strip out the leading "0" in the IP address.
•
For ex. IP address: 192.168.001.014, you need to type in
Once the HTTP request is entered and sent from a web browser, the user will see a log-in screen. There
are two default passwords for the login page:
Grandstream Networks, Inc.
G
UIDE
IP A
DDRESS
HT-701 User Manual
Firmware Version 1.0.0.17
http://192.168.1.14 in the web browser.
Last Updated: 02/2012
Page 15 of 31