Grandstream Networks HT813 Administration Manual
  1. Manuals
  2. Brands
  3. Grandstream Networks Manuals
  4. Gateway
  5. HT813
  6. Administration manual
Grandstream Networks HT813 Administration Manual

Grandstream Networks HT813 Administration Manual

Hide thumbs Also See for HT813:
Table of Contents

Advertisement

Quick Links

Download this manual
Grandstream Networks, Inc.
HT813
Administration Guide

Advertisement

Table of Contents
loading

Related Manuals for Grandstream Networks HT813

Summary of Contents for Grandstream Networks HT813

  • Page 1 Grandstream Networks, Inc. HT813 Administration Guide...

  • Page 2: Product Overview

    HT813 - Administration Guide Thank you for purchasing Grandstream’s HT813, It is the first ATA in the HandyTone 81x series offering functions as a true 3- in-1 gateway for PSTN network, analog telephone FXS interface and IP network. It enables remote call origination and termination from/to PSTN.
  • Page 3 Network Two (2) 10/100 Mbps ports (RJ45) with integrated NAT router Interface LED Indicators POWER, FXO, FXS, WAN, LAN. Factory Reset Button Voice, Fax, Modem Telephony Caller ID display or block, call waiting, flash, blind or attended transfer, forward, hold, do not disturb, Features 3-way conference G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B, G.726, iLBC, OPUS, dynamic...

  • Page 4: Getting Started

    Figure 1: HT813 Package Contents Check the package before installation. If you find anything missing, contact your system administrator HT813 Ports Description The following figure describes the different ports on the back panel of the HT813. Figure 2: HT813 Back Panel...
  • Page 5 2. Connect the WAN port of the HT813 to a router, switch or modem using an Ethernet cable. 3. Insert the power adapter into the HT813 and connect it to a wall outlet and make sure to respect the technical specifications of the power adapter used.
  • Page 6 Status Power LED The Power LED lights up when the HT813 is powered on and it flashes when the HT813 is booting up. WAN LED The WAN LED lights up when the HT813 is connected to your network through the WAN port.

  • Page 7: Configuration Guide

    Obtain HT813 IP Address via Connected Analogue Phone HT813 is by default configured to obtain the IP address from DHCP server where the unit is located. To know which IP address is assigned to your HT813, you should access to the “Interactive Voice Response...
  • Page 8 The current WAN IP address is announced “IP Address “ + IP If using “Static IP Mode”, enter 12-digit new IP address. You need to reboot your address HT813 for the new IP address to take Effect. “Subnet “ + IP Same as menu 02 address “Gateway “...

  • Page 9: Configuration Via Web Browser

    4. Enter the administrator’s password to access the Web Configuration Menu. Note: The computer must be connected to the same sub-network as the HT813. This can be easily done by connecting the computer to the same hub or switch as the HT813.

  • Page 10: Saving The Configuration Changes

    Changing Admin Level Password 1. Access your HT813 web UI by entering its IP address in your favorite browser. 2. Enter your admin password (default: admin).

  • Page 11: Changing Viewer Password

    1. Access your HT813 web UI by entering its IP address in your favorite browser. 2. Enter your admin password (default: admin). 3. Press Login to access your settings. 4. Go to Basic Settings �� New End User Password and enter the new end-user password.

  • Page 12: Web Configuration Pages Definitions

    Figure 8: Web HTTP(S) Port Web Configuration Pages Definitions This section describes the options in the HT813 Web UI. STATUS: Displays the system info, network status, account status, and line options. BASIC SETTINGS: Configures the end user level password, IP address modes, web access, time zone settings and language.
  • Page 13 ● Prog: Specifies Program version. This is the main firmware release number, which is always used for identifying the software system of the HT813. ● CPE: Specifies CPE version. The CPE version is displayed only when HT813 is connected to an ACS using the TR- 069 protocol.
  • Page 14 Note: Make sure to reboot the ATA for the changes to take effect. IPv4 Allows users to configure the appropriate network settings on the HT813 to obtain IPv4 address. Users could select DHCP, Address Static IP or PPPoE. By default, it is set to DHCP.
  • Page 15 Allows users to configure the appropriate network settings on the HT813 to obtain an IPv6 address. Users could select DHCP, or Static IP. By default, it is set to DHCP. DHCP mode: all the field values for the static IP mode are not used (even though they are still saved in the flash memory.) IPv6 The ATA acquires its IP address from the first DHCP server it discovers from the LAN it is connected.
  • Page 16 Default value is 120 hrs. (5 days). The length of time the IP address is assigned to the LAN clients. Value is set in units of Lease Time hours. This function forwards all WAN IP traffic to a specific IP address if no matching port is used by HT813 or in the defined DMZ IP port forwarding.
  • Page 17 1. ISP Data Reset: All ISP (Internet Service Provider) configuration which may affect the IP address will be reseted (including WAN static IP). 2. VoIP Data Reset: All VoIP related configuration (mainly everything located on FXS page). 3. Full Reset: Both VoIP and ISP-related configuration at the same time. Note: After choosing the reset type, you will have to click the reset button for it to take effect.
  • Page 18 The default is fm.grandstream.com/gs. Sets the IP address or domain name of the configuration server. The server hosts a copy of the configuration file to be installed on the HT813. Config Server Note: Starting from firmware 1.0.17.2 , you can specify the protocol used in the web request. (example: Path https://192.168.5.120)
  • Page 19 Upgrade Always Check Configures the HT813 to always search for the new firmware at boot up. During the boot stage, the HT813 will for New contact the firmware upgrade server to search for a new firmware, when available it will start the upgrade process, Firmware at otherwise it will boot normally.
  • Page 20 Note: “Let’s encrypt” root CA certificate has been updated on the firmware release 1.0.15.7 Note: Sectigo CA and Charter CA are some examples of Trusted CA Certficates. SIP TLS Specifies SSL certificate used for SIP over TLS is in X.509 format. The HT813 has built-in private key and SSL Certificate certificate.
  • Page 21 Private Key Enables the SNMP Service. Enable SNMP Default is No. SNMP Version Choose between (Version 1, Version 2c, or Version 3). SNMP Port Listening Port of SNMP daemon (Default 161). SNMP Trap IP IP address of trap destination. Address Port of Trap Port of Trap destination (Default 162) port...
  • Page 22 SNMPv3 Trap Select the Privacy Protocol: “None” or “AES/AES128” or “DES”. Privacy Protocol SNMPv3 Trap Authentication Enter the Trap Authentication Key. SNMPv3 Trap Enter the Trap Privacy Key. Privacy Key Enable RADIUS Web Access Default is No. Control Action upon RADIUS Auth Choose action upon RADIUS server error.
  • Page 23 Otherwise it will ring ON ms and a pause of OFF ms and then repeat the pattern. Ringback Tone Example configuration for N.A. Busy Tone Dialtone: Reorder Tone f1=350@-13, f2=440@-13,c=0/0; Confirmation Syntax: f1=freq@vol, f2=freq@vol, c=on1/off1-on2/off2-on3/off3; […] Tone Call Waiting (Note: freq: 0 – 4000Hz; vol: -30 – 0dBm) Tone Prompt Tone Prompt Tone...
  • Page 24 Syslog Server URL or IP address of syslog server. Select HT813 to report the log level. The default is NONE. The level is one of EXTRA DEBUG, DEBUG, INFO, WARNING, or ERROR. Syslog messages are sent based on the following events: 1.
  • Page 25 Specifies IP address or domain name of outbound Proxy, or media gateway, or session border Outbound Proxy controller. Used by HT813 for firewall or NAT penetration in different network environments. If symmetric NAT is detected, STUN will not work and only outbound proxy can correct the problem.
  • Page 26 Enabled: “Tel:” will be used instead of “sip:” in the SIP request. Please consult your carrier before changing this parameter. Default is Disabled. Controls whether the HT813 needs to send REGISTER messages to the proxy server. Default setting is SIP Registration Yes.
  • Page 27 Defines local port to use by the HT813 for listening and transmitting SIP packets. Default value for Local SIP Port FXS is 5060. Defines the local RTP-RTCP port pair the HT813 will listen and transmit. It is the HT813 RTP port for Local RTP Port channel 0. The default value for FXS port is 5004.
  • Page 28 SIP Messages Check SIP User ID Checks SIP User ID in the Request URI of incoming INVITE; if it does not match the HT813 SIP User for Incoming ID, the call will be rejected. Direct IP calling will also be disabled. Default is No.
  • Page 29 Selects the Caller ID display order which need to be respected by the HT813. The available options are: Auto: When set to “Auto”, the HT813 will look for the caller ID in the order of P-Asserted Identity Header, Remote-Party-ID Header and From Header in the incoming SIP INVITE.

  • Page 30: Off Hook Auto Dial

    Specifies the auto-dial delay after off hook. Dial Delay Proxy-Require Determines a SIP Extension to notify the SIP server that the HT813 is behind a NAT/Firewall. Use NAT IP Defines NAT IP address used in SIP/SDP messages. It should only be used if required by ITSP.
  • Page 31 Do Not Escape ‘#’ Replaces # by %23 in some special situations. Default is No. as %23 in SIP URI Disable Multiple Sends only one m line in SDP, regardless of how many m fields are in the incoming SDP. Default is m Line in SDP Stops ringing when incoming call if not answered within a specific period of time.

  • Page 32: Anonymous Call Rejection

    Dial Plan Rules: 1. Accept Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d 2. Grammar: x – any digit from 0-9; 1. xx+ – at least 2 digits number; 2. xx – exactly 2 digits number; 3. ^ – exclude; 4. . – wildcard, matches one or more characters 5.
  • Page 33 Selects Soft switch vendors’ special requirements Example of vendors: Standard, Broadsoft, CBCOM, Special Feature RNK, Huawei, China Mobile, ZTE IMS, PhonePower, TELKOM SA, Vonage, Metaswitch, CenturyLink, MTS. Default is Standard. Enable Session Disable the session timer when this option is set to “No”. By default, this option is enabled. Timer Enables SIP sessions to be periodically “refreshed”...
  • Page 34 Includes only the first matching vocoder in its 200OK response, otherwise it will include all matching Use First Matching vocoders in same order received in INVITE. Vocoder in 200OK Default is No. Configures vocoders in a preference list (up to 7 preferred vocoders) that will be included with same Preferred Vocoder order in SDP message.
  • Page 35 Configures the SRTP Key Length , it can be set to : 1. AES 128&256 bit SRTP Key Length 2. AES 128 bit 3. AES 256 bit Default value is AES 128&256 bit Crypto Life Time Adds crypto life time header to SRTP packets. Default is Yes. Depends on standard phone type (and location).
  • Page 36 40 to 2000 ms. Default values are 300 minimum and 1100 maximum. Specifies the on-hook time for an on-hook event to be validated. HT813 supports a range from 40 to On Hook Timing 2000 ms. Default value is 400.
  • Page 37 Specifies IP address or domain name of outbound Proxy, or media gateway, or session border Outbound Proxy controller. Used by HT813 for firewall or NAT penetration in different network environments. If symmetric NAT is detected, STUN will not work and only outbound proxy can correct the problem.
  • Page 38 SIP over the selected transport method. Default is UDP. When TLS is enabled on the FXO HT813 device, the SIP URI Scheme When Using TLS option allows users to specify the type of SIP URI scheme that will be used during the communication. The...
  • Page 39 Defines local port to use by the HT813 for listening and transmitting SIP packets. Default value for Local SIP Port FXO port is 5062. Defines the local RTP-RTCP port pair the HT813 will listen and transmit. It is the HT813 RTP port for Local RTP Port channel 0. The default value for FXS port is 5012.
  • Page 40 SIP Message Check SIP User ID Checks SIP User ID in the Request URI of incoming INVITE; if it does not match the HT813 SIP User for Incoming ID, the call will be rejected. Direct IP calling will also be disabled. Default is No.
  • Page 41 Note: Please refer to the user guide for detailed steps to perform above operations. Proxy-Require Determines a SIP Extension to notify the SIP server that the HT813 is behind a NAT/Firewall. Use NAT IP Defines NAT IP address used in SIP/SDP messages. It should only be used if required by ITSP.
  • Page 42 Do Not Escape ‘#’ Replaces # by %23 in some special situations. Default is No. as %23 in SIP URI Disable Multiple m Sends only one m line in SDP, regardless of how many m fields are in the incoming SDP. Default is Line in SDP Stops ringing when incoming call if not answered within a specific period of time.
  • Page 43 Dial Plan Rules: 1. Accept Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d 2. Grammar: x – any digit from 0-9; 1. xx+ – at least 2 digits number; 2. xx – exactly 2 digits number; 3. ^ – exclude; 4. . – wildcard, matches one or more characters 5.
  • Page 44 Selects Soft switch vendors’ special requirements Example of vendors: Standard, Broadsoft, CBCOM, Special Feature RNK, Huawei, China Mobile, ZTE IMS, PhonePower, TELKOM SA, Vonage, Metaswitch, CenturyLink, MTS. Default is Standard. Enables SIP sessions to be periodically “refreshed” via a SIP request (UPDATE, or re-INVITE). When the session interval expires, if there is no refresh via an UPDATE or re-INVITE message, the session Session Expiration will be terminated.
  • Page 45 Configures vocoders in a preference list (up to 7 preferred vocoders) that will be included with Preferred Vocoder same order in SDP message. Vocoder types are G.711 A-/U-law, G.726-32, G.723, G.729, iLBC and OPUS. Voice Frames per Transmits a specific number of voice frames per packet. Default is 2; increases to 10/20/32/64 for G711/G726/G723/other codecs, respectively.
  • Page 46 Selects the caller ID scheme. Available options: Bellcore/Telcordia ETSI-FSK during ringing ETSI-FSK prior to ringing with DTAS ETSI-FSK prior to ringing with LR+DTAS ETSI-FSK prior to ringing with RP ETSI-DTMF during ringing ETSI-DTMF prior to ringing with DTAS Caller ID Scheme ETSI-DTMF prior to ringing with LR+DTAS ETSI-DTMF prior to ringing with RP SIN 227 –...
  • Page 47 This value should be used in case the PSTN provider uses line power drop to indicate call Disconnect completion to the end point. In this case the HT813 will search for a power drop. This is a preconfigured value of duration for a line power drop used by specific service providers.
  • Page 48 This should be set to Yes only if the FXO lines are subscribed to PR service from PSTN Service provider. It is merely a PR detect feature. Default is No. Enable Polarity Reversal Note: If there is no PR service from provider on the FXO line, and this setting is configured to Yes, calls will not be successful.

  • Page 49: Inter-Digit Timeout

    This configuration is applicable for VoIP to PSTN calls and indicates one or two stage dialing Stage Method (1/2) methods. The time to wait before HT813 initiates the call via PSTN line. Min Delay Before Dial PSTN Number Default 500ms, range is from 50 to 65000ms.
  • Page 50 Select voice menu option 01 to enable HT813 to use DHCP. STATIC IP MODE Select voice menu option 01 to enable HT813 to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway, and DNS server, respectively.

  • Page 51: Configuration Through A Central Server

    Register a SIP Account The HT813 supports 2 SIP accounts. Please refer to the following steps in order to register your accounts via web user interface 1. Access your HT813 web UI by entering its IP address in your favorite browser.
  • Page 52 Figure 9: FXS Port Settings After applying your configuration, your account will register to your SIP Server, you can verify if it has been correctly registered with your SIP server from your HT813 web interface under Status �� Port Status ��...
  • Page 53 Information Capture The information capture allows the HT813 to make a packet capture, by clicking the capture button, when that is set, the user can follow the below steps to download the capture File: 1. Set “With Secret Key Information” to “Yes”...

  • Page 54: Call Features

    Wait 30 seconds to log in again. Call Features The HT813 supports all the traditional and advanced telephony features. Call Features Forcing a Codec (per call) *027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729 (G729), *027201 (iLBC).

  • Page 55: Upgrading And Provisioning

    “Firmware Server Path” field and choose to upgrade via TFTP or HTTP/HTTPS or FTP/FTPS. 5. Make sure to check “Always Check for New Firmware”. 6. Update the change by clicking the “Apply” button at the bottom of the page. Then “Reboot” or power cycle the HT813 to update the new firmware.

  • Page 56: Upgrading Via Local Directory

    1. Download the firmware file from Grandstream web site 2. Unzip it and copy the file in to a folder in your PC 3. From the HT813 web interface (Advanced Settings page) you can browse your hard drive and select the folder you previously saved the file (HT8xfw.bin) 4.

  • Page 57: Firmware And Configuration File Prefix And Postfix

    When the HT813 boots up or reboots, it will send a request to download a file named “cfgxxxxxxxxxxxx” followed by a configuration XML file named “cfgxxxxxxxxxxxx.xml”, where “xxxxxxxxxxxx” is the MAC address of the phone, i.e., “cfg000b820102ab”...

  • Page 58: Restore Factory Default Settings

    To reset default factory settings using the reset button please follow the steps above: 1. Unplug the Ethernet cable. 2. Locate the reset hole on the back panel of your HT813. 3. Insert a pin in this hole, and press for about 7 seconds.

  • Page 59: Reset From Web Interface (Reset Type)

    Factory Reset will be disabled if the “Lock keypad update” is set to “Yes”. If the HT813 was previously locked by your local service provider, pressing the RESET button will only restart the unit. The device will not return to factory default settings.
  • Page 60 Added feature “Disable Weak TLS Cipher Suites”. [Disable Weak TLS Cipher Suites] Added feature “Minimum TLS Version”. [Minimum TLS Version] Added feature “Maximum TLS Version”. [Maximum TLS Version] Added feature “Syslog Protocol”. [Syslog Protocol] Firmware Version 1.0.1.2 No major changes. Firmware Version 1.0.0.8 This is the initial version for HT813.
  • Page 61 Need Support? Can’t find the answer you’re looking for? Don’t worry we’re here to help! CONTACT SUPPORT...

Table of Contents