Table of Contents
Advertisement
its battery is waiting to be charged.
5. The charger has the capability of displaying the battery's charge status.
The indicator will show the following: solid red=1-30%; solid
yellow=31-60%; flashing green=61-90%; solid green=91-100%.
Desktop Battery Charger Troubleshooting
If the battery is not charging and there is:
A flashing yellow indicator —
• If a battery is in the rear pocket, the rear pocket's LED will continue
to flash yellow until the battery in the front pocket is more than 90%
charged (front pocket's LED is solid green). This is normal
operation.
• To protect your battery's life expectancy, the charger will not charge
a battery whose temperature is below 5°C (41°F) or above 40°C
(104°F). Charging outside of these temperature limits can drastically
reduce the life expectancy of your battery.
No LED indication —
• Check that the i1000 with battery, or a battery alone, is inserted
correctly (see "Charging a Battery").
• Make sure the transformer is plugged into an appropriate AC outlet,
and that the connector is properly seated.
• Remove the battery from the charger. Use an ordinary pencil eraser
to clean the four metal contacts on the battery and then place the
battery into the charger.
• If the LED indicator remains turned off, the battery may be defective
and should be replaced.
A flashing red LED indicator—
• Remove the battery from the charger. Use an ordinary pencil eraser
to clean the metal contacts on the battery and then place the battery
into the charger.
• If the LED indicator continues to flash red, the battery may be
defective and should be replaced.
74
i1000
USER GUIDE
Advertisement
Table of Contents
