Desktop Charger - Motorola Nextel iDEN i1000 User Manual

Digital phone
Hide thumbs Also See for Nextel iDEN i1000:
Table of Contents

Advertisement

2. Press the latches on the accessory connector.
3. Pull the accessory connector from the bottom of the Nextel phone.
Vehicular Battery Charger Operating Specifications
Operating voltage range: 10.8 - 33.0 Vdc.
Operating temperature range: -30°C to +60°C

DESKTOP CHARGER

The Desktop Charger will charge Motorola authorized batteries listed
on page 70.
Front Pocket
LED
Indicators
Pin Connector
Charging a Battery
1. Plug the flat end of the power-supply cord into the receptacle on the
back of the charger.
2. Plug the transformer end of the power-supply cord into any standard AC
wall outlet. The charger performs a quick power-up self-test, during
which the LED indicators will flash once to indicate a successful
power-up.
3. Attach a battery to your Nextel phone. Insert the bottom of the i1000
onto the pin connector located in the charger's front pocket.
4. If the i1000 is properly seated in the front pocket, the charger's front
pocket LED indicator will light green to indicate that the battery is
being charged. If a battery is in the rear pocket and the i1000 with a
battery is inserted into the front pocket, the battery in the front pocket
will charge to full capacity before the battery in the rear pocket is
charged. The LED for the rear pocket will flash yellow, indicating that
i1000
Rear Pocket
Power supply cord receptacle
Figure 4: Desktop Charger
USER GUIDE
73

Advertisement

Table of Contents
loading

Table of Contents