Table of Contents
Advertisement
Press and hold Program button and, at the
same time, plug the power cord into the
wall socket.
Machine will display
Release Program button and press Reset
button to scroll through options (which
alternate between Plumbed and Manual)
until the display reads
(i.e. filled by hand into the fill funnel)
Press and release the Program button to
return to normal operation.
When display shows
Pour water into funnel, as shown, until
water is level with the 'full' mark on the
side of the fill funnel.
Display will then show
After a delay of approximately 15-20
minutes, the display will show 'Ready' and
the machine can be used.
Manual Fill Option
or
5
Advertisement
Table of Contents
