Table of Contents
Advertisement
(plumbed in machine only)
Ensure water supply is turned on.
Press the RESET button to return
machine to normal mode.
O P E R A T O R ' S
or
Pressure built up within the capsule while
or
brewing, the brewing cycle was stopped
and the capsule was ejected into the bin.
The customer may have received either
a short measure or possibly no drink at
all.
Switch off the machine and, after
following the instructions for 'Cleaning the
Clamp Assembly' (on page 8), close the
main door and switch on the machine.
If the fault recurs, call a Technical Service
Representative.
H A N D B O O K
Advertisement
Table of Contents
