How Individual Filters Work - Netopia R7100-C User Reference Manual

Sdsl router
Table of Contents

Advertisement

How individual filters work
As described above, a filter applies criteria to an IP packet and then takes one of three actions:
A filter's actions
Passes the packet to the local or remote network
Blocks (discards) the packet
Ignores the packet
A filter passes or blocks a packet only if it finds a match after applying its criteria. When no match occurs, the
filter ignores the packet.
A filtering rule
The criteria are based on information contained in the packets. A filter is simply a rule that prescribes certain
actions based on certain conditions. For example, the following rule qualifies as a filter:
Block all Telnet attempts that originate from the remote host 199.211.211.17.
This rule applies to Telnet packets that come from a host with the IP address 199.211.211.17. If a match
occurs, the packet is blocked.
Here is what this rule looks like when implemented as a filter on the Netopia R7100:
+-#--Source IP Addr--Dest IP Addr-----Proto-Src.Port-D.Port--On?-Fwd-+
+--------------------------------------------------------------------+
| 1
199.211.211.17
+--------------------------------------------------------------------+
To understand this particular filter, look at the parts of a filter.
Parts of a filter
A filter consists of criteria based on packet attributes. A typical filter can match a packet on any one of the
following attributes:
The source IP address (where the packet was sent from)
The destination IP address (where the packet is going)
The type of higher-layer Internet protocol the packet is carrying, such as TCP or UDP
Port numbers
A filter can also match a packet's port number attributes, but only if the filter's protocol type is set to TCP or
UDP, since only those protocols use port numbers. The filter can be configured to match the following:
The source port number (the port on the sending host that originated the packet)
The destination port number (the port on the receiving host that the packet is destined for)
0.0.0.0
TCP
23
Yes No
Security 13-7
|

Advertisement

Table of Contents
loading

This manual is also suitable for:

R7100

Table of Contents