Adding A Filter Set - Netopia R7100-C User Reference Manual

3. View, change, or delete individual filters and filter sets.
The sections below explain how to execute these steps.
Adding a filter set
You can create up to eight different custom filter sets. Each filter set can contain up to 16 output filters and up
to 16 input filters.
To add a new filter set, select Add IP Filter Set in the IP Filter Sets screen and press Return. The Add Filter Set
screen appears.
Note: There are two groups of items in the Add IP Filter Set screen, one for input filters and one for output
filters. The two groups work in essentially the same way, as you'll see below.
Filter Set Name:
Display/Change Input Filter...
Add Input Filter...
Delete Input Filter...
Display/Change Output Filter...
Add Output Filter...
Delete Output Filter...
ADD FILTER SET
Configure the Filter Set name and its associated Filters.
Naming a new filter set
All new filter sets have a default name. The first filter set you add will be called Filter Set 1, the next filter will be
Filter Set 2, and so on.
To give a new filter set a different name, select Filter Set Name and enter a new name for the filter set.
To save the filter set, select ADD FILTER SET. The saved filter set is empty (contains no filters), but you can
return to it later to add filters (see
before saving it (see "Adding filters to a filter set" on page
To leave the Add Filter Set screen without saving the new filter set Select CANCEL. You are returned to the IP
Filter Sets screen.
Add IP Filter Set
"Modifying filter sets" on page
Filter Set 3
CANCEL
13-17). Or you can add filters to your new set
13-14).
Security 13-13