Software And Protocols; Agency Approvals; Regulatory Notices - Netopia R7100-C User Reference Manual

Sdsl router
Table of Contents

Advertisement

Technical Specifications and Safety Information F-3

Software and protocols

Software media: Software preloaded on internal flash memory; field upgrades done via download to internal
flash memory via XMODEM or TFTP
Routing: TCP/IP Internet Protocol Suite, RIP, AppleTalk*, LocalTalk-to-Ethernet routing*, AURP tunneling*,
MacIP*, IPX
* Optional add-on feature
WAN support: SDSL
Security: IP/IPX firewalls, UI password security
SNMP network management: SNMPv1, MIB-II (RFC 1213), Interface MIB (RFC 1229), Ethernet MIB (RFC
1643), AppleTalk MIB-I (1243), Netopia R7100 MIB
Management/configuration methods: HTTP (Web server), serial console, remote modem console, Telnet,
SNMP
Diagnostics: Ping, event logging, routing table displays, traceroute, statistics counters, web-based
management

Agency approvals

The Netopia R7100 SDSL Router has met the safety standards (per CSA-950) of the Canadian Standards
Association for Canada.
The Netopia R7100 SDSL Router has met the safety standards (per UL-1950) of the Underwriters Laboratories
for the United States.

Regulatory notices

Warning
This is a Class A product. In a domestic environment this product may cause radio interference, in which case
the user may be required to take adequate measures. Adequate measures include increasing the physical
distance between this product and other electrical devices.
United States. This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Service requirements. In the event of equipment malfunction, all repairs should be performed by our Company
or an authorized agent. Under FCC rules, no customer is authorized to repair this equipment. This restriction
applies regardless of whether the equipment is in or our of warranty. It is the responsibility of users requiring
service to report the need for service to our Company or to one of our authorized agents. Service can be
obtained at Netopia, Inc., 2470 Mariner Square Loop, Alameda, California, 94501.

Advertisement

Table of Contents
loading

This manual is also suitable for:

R7100

Table of Contents