Table of Contents
Advertisement
12-12 User's Reference Guide
System Information
The System Information screen gives a summary view of the general system level values in the Netopia R7100
SDSL Router.
From the Statistics & Logs menu select System Information. The System Information screen appears.
Serial Number
Firmware Version
Processor Speed (MHz)
Flash ROM Capacity (MBytes)
DRAM Capacity (MBytes)
Ethernet
Auxiliary Serial Port
WAN 1 Interface
WAN 2 Interface
AppleTalk Feature Set
User Restriction (# users)
Analog Dial-In Kit
The information display varies by model, firmware version, feature set, and so on. You can tell at a glance your
particular system configuration.
SNMP
The Netopia R7100 includes a Simple Network Management Protocol (SNMP) agent, allowing monitoring and
configuration by a standard SNMP manager.
The Netopia R7100 supports the following management information base (MIB) documents:
MIB II (RFC 1213)
Interface MIB (RFC 1229)
Ethernet MIB (RFC 1643)
AppleTalk MIB I (RFC 1243)
Netopia MIB
These MIBs are on the Netopia R7100 CD included with the Netopia R7100. Load these MIBs into your SNMP
management software in the order they are listed here. Follow the instructions included with your SNMP
manager on how to load MIBs.
System Information
70-02-ec (7340780)
4.3
33
1
4
8 Port 10Base-T
Switched Async
SDSL
Not Installed
Installed
13
Installed
Advertisement
Table of Contents
