Filtering On The Lan Interface - Netopia R6100 Reference Manual

Filtering on the LAN Interface

The Netopia R6000 Series offers LAN-side filtering on the Ethernet hub. This permits multiple subnets on the
Ethernet LAN to be kept separate from one another and operate as virtual independent networks sharing a
single Internet connection. Small- to medium-sized offices can benefit by using a single router to connect to the
Internet, with multiple businesses within the office using independent subnets on the network.
For information on creating multiple subnets, see
To attach a filter set to the Ethernet hub interface, navigate to the IP Setup screen from the Main Menu.
Main
Menu
Any customized filter set you create, can be associated with the Ethernet hub, as well as the WAN interface, as
shown below:
Ethernet IP Address:
Ethernet Subnet Mask:
Define Additional Subnets...
Default IP Gateway:
Backup IP Gateway:
Primary Domain Name Server:
Secondary Domain Name Server:
Domain Name:
Receive RIP...
Transmit RIP...
LAN (EN Hub) Filter Set...
Remove Filter Set
Static Routes...
Network Address Translation (NAT)...
Set up the basic IP attributes of your Netopia in this screen.
Select LAN (EN Hub) Filter Set and from the pop-up menu, select the filter set you want to associate with the
LAN interface. Press Return.
"IP subnets" on page
System
Configuration
IP Setup
10-5.
Network
Protocols Setup
192.168.1.1
255.255.255.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Both
Off
IP Address Serving...
Filter Sets...
Security 16-43
IP
Setup