Multinat Configuration; Basic Configuration - Easy Setup Profile - Netopia R6100 Reference Manual

MultiNAT Configuration
You configure the MultiNAT features through the console menu:
For a simple 1-to-many NAT configuration (classic NAT), use the
described below.
For the more advanced features, such as server lists and dynamic NAT, follow the instructions in:
IP setup, described on
IP profile parameters, described on
Basic configuration – Easy Setup Profile
The screen below is an example. Depending on the type of router you are using, fields displayed in this screen
may vary.
Number to Dial:
Address Translation Enabled:
IP Addressing...
Local WAN IP Address:
Local WAN IP Mask:
Remote IP Address:
Remote IP Mask:
PPP Authentication...
Send User Name:
Send Password:
PREVIOUS SCREEN
Enter the directory number for the remote network connection.
Enter basic information about your WAN connection with this screen.
The Local WAN IP Address is used to configure a NAT public address range consisting of the Local WAN IP
Address and all its ports. The public address map list is named Easy-PAT List and the port map list is named
Easy-Servers.
When you exit this screen the two map lists, Easy-PAT List and Easy-Servers, are created by default and NAT
configuration becomes effective.This will map all your private addresses (0.0.0.0 through 255.255.255.255) to
your public address. These map lists are bound to the Easy Setup Profile. See
Lists on page 11-24.
This is all you need to do if you want to continue to use a single PAT, or 1-to-many, NAT configuration.
page 11-9
page 11-24
Connection Profile 1: Easy Setup Profile
Multiple Network Address Translation (MultiNAT) 11-7
Basic configuration – Easy Setup
2125551212
Yes
Unnumbered
206.1.1.6
0.0.0.0
127.0.0.2
255.255.255.255
PAP
tony
*****
NEXT SCREEN
Binding Map Lists and Server
Profile,