Table of Contents
Advertisement
Console-based management is a menu-driven interface for the capabilities built into the Netopia R6000 Series.
Console-based management provides access to a wide variety of features that the router supports. You can
customize these features for your individual setup. This chapter describes how to access the console-based
management screens.
This section covers the following topics:
"Connecting through a Telnet Session" on page 6-2
"Connecting a Console Cable to your Router" on page 6-3
"Navigating through the Console Screens" on page 6-4
Console-based management screens contain seven entry points to the Netopia Router configuration and
monitoring features. The entry points are displayed in the Main Menu shown below:
Return/Enter goes to Easy Setup -- minimal configuration.
You always start from this main screen.
The Easy Setup menus display and permit changing the values contained in the default connection profile.
You can use Easy Setup to initially configure the router directly through a console session.
Easy Setup menus contain up to five descendant screens for viewing or altering these values. The number
of screens depends on whether you have optional features installed.
The WAN Configuration menu displays and permits changing your connection profile(s) and default profile,
creating or deleting additional connection profiles, and configuring or reconfiguring the manner in which you
may be using the router to connect to more than one service provider or remote site.
Netopia R6100 v4.8
Easy Setup...
WAN Configuration...
System Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
Console-Based Management 6-1
Advertisement
Table of Contents
