Siemens SIMATIC ET 200SP Manual page 24

Technical specifications
6.1 Technical specifications
Encoder supply
24 V encoder supply
24 V
Short-circuit protection
Output current, max.
Power loss
Power loss, typ.
Address area
Address space per module
Address space per module, max.
Analog inputs
Number of analog inputs
Maximum permitted input current for current input
(destruction limit)
Cycle time (all channels), min.
Input ranges (rated values), currents
0 to 20 mA
Input resistance (0 to 20 mA)
-20 mA to +20 mA
Input resistance (-20 mA to +20 mA)
4 mA to 20 mA
Input resistance (4 mA to 20 mA)
Cable length
Shielded, max.
Formation of analog values for the inputs
Integration and conversion time/resolution per
channel
Resolution with overrange (bit including sign),
max.
Integration time configurable
Interference voltage suppression for interference
frequency f1 in Hz
Conversion time (per channel)
Measured value smoothing
Number of steps
Configurable
Encoders
Connection of the signal transmitters
For voltage measurement
For current measurement as 2-wire transducer
•
For current measurement as 4-wire transducer
24
Load of 2-wire transducer, max.
6ES7134-6GF00-0AA1
Yes
Yes
0.7 A; total current of all encoders/channels
0.7 W; without encoder supply voltage
16 bytes
8; single-ended
50 mA
1 ms; per channel
Yes
100 Ω; 15 bits
Yes
100 Ω; 16 bits including sign
Yes
100 Ω; 15 bits
200 m
16 bits
Yes
16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60)
ms; 180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75)
4; none; 4/8/16 times
Yes
No
Yes
650 Ω
Yes
Analog input module AI 8xI 2-/4-wire BA (6ES7134-6GF00-0AA1)
Manual, 03/2015, A5E34941201-AA