Siemens SIMATIC ET 200SP Manual page 20

Interrupts/diagnostics alarms
5.1 Status and error displays
Meaning of the LEDs
The following tables contain the meaning of the status and error displays. Corrective
measures for diagnostics alarms can be found in section Diagnostics alarms (Page 22).
DIAG LED
Table 5- 1
DIAG LED
Channel status LED
Table 5- 2
Channel status
PWR LED
Table 5- 3
PWR LED
20
Error display of the DIAG LED
Meaning
Backplane bus supply of the ET 200SP not OK
Off
Module parameters not assigned
Flashes
Module parameters assigned and no module diagnostics
On
Module parameters assigned and module diagnostics
Flashes
Status display of the channel status LED
Meaning
LED
Channel deactivated
Off
Channel activated
On
Status display of the PWR LED
Meaning
No supply voltage L+
Off
Supply voltage L+ present
On
Analog input module AI 8xI 2-/4-wire BA (6ES7134-6GF00-0AA1)
Manual, 03/2015, A5E34941201-AA