Table of Contents
Advertisement
Verifying TCP/IP Properties for Windows XP or 2000
To check your PC's TCP/IP configuration:
1. On the Windows taskbar, click the Start button, and then click Run.
The Run window opens.
2. Type
and then click OK.
cmd
A command window opens
3. Type
ipconfig /all
Your IP Configuration information will be listed, and should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway:
•
The IP address is between 192.168.0.2 and 192.168.0.254
•
The subnet mask is 255.255.255.0
•
The default gateway is 192.168.0.1
4. Type
exit
Preparing Your PCs for Network Access
User Manual for the NETGEAR Pre-N Wireless PC Card WGM511
December 2004
C-11
Advertisement
Table of Contents
