NETGEAR WGM511 User Manual page 23

If the Resource CD main page does not automatically load, browse to the CD and double-click
on autorun.exe.
c. Click the Install Driver & Utility link to open the NETGEAR Smart Wizard.
d. You will be prompted to choose the country you are located in. Select your location from
the list.
e. Follow the Smart Wizard steps.
f. Click Finish when done.
g. If prompted, restart your computer.
Note: If a Windows XP Certification warning appears, click Continue Anyway to
proceed.
Install the NETGEAR Pre-N Wireless PC Card WGM511.
a. Hold the WGM511 with the NETGEAR logo facing up and insert it into a CardBus slot in
your computer.
After a short delay the Found New
Hardware Wizard displays.
Note: If Windows 2000 displays a Digital
Signature Not Found warning, click Yes to
continue.
b. Select Install the software automatically
(Recommended) and click Next.
You will be prompted to enable the
NETGEAR Smart Wizard Wireless
Assistant.
c. Click Yes to accept this option.
If you choose No, you must read the Windows XP documentation to learn how to use hte
Windows XP wireless network configuration utillity.
d. Click Finish to complete the installation. You will see the WGM511 system tray icon on
the lower right part of the Windows task bar.
Basic Setup
User Manual for the NETGEAR Pre-N Wireless PC Card WGM511
December 2004
Found New Hardware Wizard
3-7