Statistics Page - NETGEAR WGM511 User Manual

3. Click Initiate Ad Hoc. The Ad Hoc Setting dialog box will appear, as shown below.
Figure 4-3: Ad Hoc Setting dialog box
4. In the Start Ad Hoc field, choose the wireless standard (802.11b or 802.11g) for your ad hoc
computer-to-computer network.
5. In the Channel field, Automatic should work. If you notice interference problems with another
nearby wireless device, select a channel that is not being used by any other wireless networks
near your wireless adapter. Use the Networks tab page to identify the channels in use in your
area.
6. Click OK.
Note: The channel number differs depending on the country. The connection speed automatically
defaults to the highest speed.

Statistics Page

The Statistics page provides real time and historical trend information on the data traffic and
performance of your wireless adapter.
NETGEAR Smart Wireless Wizard
User Manual for the NETGEAR Pre-N Wireless PC Card WGM511
December 2004
4-7