NETGEAR WGM511 User Manual page 20

User Manual for the NETGEAR Pre-N Wireless PC Card WGM511
b. Insert the Resource CD for the WGM511
into your CD drive. The Resource CD main
page loads.
Note: If the Resource CD main page does
not automatically load, browse to the CD
and double-click on autorun.exe.
c. Click the Install Driver & Utility link.
The NETGEAR Smart Wizard opens.
d. Follow the Smart Wizard steps, and click
Finish when done.
Install the NETGEAR Pre-N Wireless PC Card WGM511.
a. Hold the WGM511 with the NETGEAR logo facing up and insert it into a CardBus slot in
your computer.
After a short delay the Found New
Hardware Wizard displays.
b. Select Install the software automatically
(Recommended) and click Next.
You will be prompted to enable the
NETGEAR Smart Wizard Wireless
Assistant.
c. Click Yes to accept this option.
If you choose No, you must read the
Windows XP documentation to learn how to
use hte Windows XP wireless network
configuration utillity.
d. Click Finish to complete the installation. You will see the WGM511 system tray icon on
the lower right part of the Windows task bar.
3-4
Resource CD main page
Found New Hardware Wizard
December 2004
Basic Setup