User Manual for the NETGEAR Pre-N Wireless PC Card WGM511
You can check the status bar in the Smart Wireless Wizard for the current connection status.
Note: If you cannot connect, see
problems with accessing network resources, the Windows Client and File and Print Sharing
software might not be installed and configured properly on your computers. Please refer to
"Preparing Your Computers for TCP/IP Networking" on page
Connecting to Another PC in Ad Hoc Mode
Figure 4-2: NETGEAR WGM511 Wireless PC Card in peer-to-peer mode
The peer-to-peer setting of the WGM511 uses ad hoc mode. Ad hoc mode is an 802.11 networking
framework in which devices or computers communicate directly with each other, without the use
of an access point. For example, this mode is used when two Windows computers are configured
with file and print sharing enabled and you want to exchange files directly between them.
4-4
December 2004
"Troubleshooting Basic Tips" on page
6-1. Also, for
C-1.
NETGEAR Smart Wireless Wizard