Verifying Tcp/Ip Properties For Windows Xp, 2000, And Nt4 - NETGEAR RangeMax WPN511 User Manual

User Manual for the NETGEAR RangeMax™ Wireless PC Card WPN511
3. Set the TCP/IP Properties.
The TCP/IP Properties dialog box displays.
a. Click the IP Address tab.
b. Select the radio button marked
"Obtain an IP address from a DHCP server".
c. Click OK. This completes the configuration of
TCP/IP in Windows NT for this computer.
d. Restart the computer.
e. Repeat these steps for each computer with this
version of Windows on your network.

Verifying TCP/IP Properties for Windows XP, 2000, and NT4

To check your computer's TCP/IP configuration:
1. On the Windows taskbar, click the Start button, and then click Run.
The Run window opens.
2. Type cmd and then click OK.
A command window opens.
3. Type ipconfig /all
Your IP Configuration information is listed, and should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway.
TCP/IP Configuration
Computer or workstation
IP Address
Subnet mask
Gateway address for router
4. Type exit
C-12
Current NETGEAR Standard Previous NETGEAR Standard
192.168.1.2 through
192.168.1.254
255.255.255.0
192.168.1.1 default address
February 2005
192.168.0.2 through
192.168.0.254
255.255.255.0
192.168.0.1 default address
Preparing Your PCs for Network Access