Table of Contents
Advertisement
•
Network Name Service Set Identification (SSID): Any (First available network)
Note: In order for the WGM511 Pre-N Wireless PC Card to communicate with a wireless
access point or wireless adapter, all devices must be configured with the same wireless
network name (SSID).
•
Network mode (Infrastructure or Ad Hoc): Infrastructure
•
Data security WEP encryption: Disabled
The section below provides instructions for setting up the NETGEAR Pre-N Wireless PC Card
WGM511 for basic wireless connectivity to an access point. The procedures below provide
step-by-step installation instructions for Windows PCs. Use the procedure that corresponds to the
version of Windows you are using.
Basic Installation Instructions
Basic instructions for Windows XP Users and for Windows 2000 users are included. Use the
procedure below that corresponds to the version of Windows that you use.
For Windows XP Users Installing a WGM511
Install the WGM511 software.
Note: During installation the following Windows messages may appear:
•
Windows Logo testing warning: Click Continue Anyway.
•
Update Drivers warning: Click Yes to proceed.
a. Power on your computer, let the operating system boot up completely, and log in as
needed.
Basic Setup
User Manual for the NETGEAR Pre-N Wireless PC Card WGM511
December 2004
3-3
Advertisement
Table of Contents
