Installation; Led Indicators - NETGEAR WAG511 User Manual

check your computer's reference guide for more details.
• Windows ® 98/ME/2000/XP (be sure to have the Windows Installation CD-ROM ready
for use during installation).
• At least 5 Megabytes disk space for installing the driver and utility programs.

LED Indicators

The Wireless Link LED on the WAG511 802.11a/b/g Wireless PC Card indicates the wireless
link condition of the station with another wireless node or the associated Access Point.
LED Activity Meaning of LED Activity
Alternate Blinking Looking for a network association.
Slow-rate Associated or joined with the network; no activity.
Fast-rate Associated or joined with the network; activity on the network.
1

Installation

1
Install the WAG511 Driver and Utility Software
IMPORTANT NOTE: You must first install the software before you plug the card into
your computer!
Follow these steps to install the WAG511 802.11a/b/g Wireless PC Card.
1. Turn on your computer.
2. Insert the WAG511 Resource CD into the CD-ROM drive.
2
3. The Autostart Wizard screen will appear, as shown here:
4. Click the Install Driver & Utility option.
5. If the Autorun wizard does not automatically start, go to your Windows Start menu and choose
Run, and type D:/Setup.exe ("D" represents your CD-ROM drive letter), and click OK.
6. The InstallShield Wizard screen will appear.
7. Click Next to continue.
3