Table of Contents
Advertisement
Remote control
Changing the frequency of remote control signal
The accessory remote control has the two choices on signal
frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control
does not function properly, attempt to change the signal frequency.
In order to set the Mode, please keep pressing the combination of
two buttons listed below simultaneously for about 3 seconds.
(1) Set to Mode 1:NORMAL... VOLUME - and RESET buttons
(2) Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons
Please remember that the REMOTE FREQ. in the SERVICE item of
the OPTION menu (58) of the projector to be controlled should be
set to the same mode as the remote control.
Using as a simple PC mouse & keyboard
The accessory remote control works as a simple mouse
and keyboard of the computer, when the projector's USB
TYPE B port and the computer's type A USB port are
connected and MOUSE is selected for the USB TYPE B
item in the OPTION menu (54).
(1) PAGE UP key: Press PAGE UP button.
(2) PAGE DOWN key: Press PAGE DOWN button.
(3) Mouse left button: Press ENTER button.
(4) Move pointer: Use the cursor buttons ▲, ▼, ◄ and ►.
(5) ESC key: Press ESC button.
(6) Mouse right button: Press RESET button.
NOTICE
►Improper use of the simple mouse & keyboard
function could damage your equipment. While using this
function, please connect this product only to a computer. Be
sure to check your computer's manuals before connecting this
product to the computer.
NOTE
When the simple mouse & keyboard function of this product does not work
correctly, please check the following.
• When a USB cable connects this projector with a computer having a built-in pointing
device (e.g. track ball) like a laptop PC, open BIOS setup menu, then select the external
mouse and disable the built-in pointing device, because the built-in pointing device may
have priority to this function.
• Windows 95 OSR 2.1 or higher is required for this function. And also this function may not work
depending on the computer's configurations and mouse drivers. This function can work with the
computer which can operate general USB mouse or keyboard.
• You cannot do things like press two buttons at once (for instance, pressing two buttons
at the same time to move the mouse pointer diagonally).
• This function is activated only when the projector is working properly. This function is not
available in any of the following cases:
- While the lamp is warming up. (The POWER indicator blinks in green.)
- When either USB TYPE A or USB TYPE B port is selected.
- While displaying BLANK (47), TEMPLATE (51) or MY IMAGE (71) screen.
- When any menu is displayed on the screen.
- While using the cursor buttons to operate the sound or screen functions such as adjusting the
sound volume, correcting the keystone, correcting the picture position and magnifying the screen.
http://www.pureglare.com.au
18
VIDEO
ASPECT
MAGNIFY
ON
OFF
(2)
KEYSTONE
POSITION
ESC
USB TYPE B
VIDEO
port
ASPECT
MAGNIFY
ON
OFF
KEYSTONE
(3)
POSITION
ESC
(5)
COMPUTER MY SOURCE/
DOC.CAMERA
AUTO
SEARCH
BLANK
FREEZE
PAGE
VOLUME
UP
DOWN
(1)
MY BUTTON
MUTE
MENU
ENTER
RESET
COMPUTER MY SOURCE/
DOC.CAMERA
(1)
AUTO
SEARCH
BLANK
FREEZE
PAGE
VOLUME
UP
(2)
DOWN
MY BUTTON
MUTE
MENU
(4)
ENTER
RESET
(6)
Advertisement
Table of Contents
