Searching An Input Signal; Selecting An Aspect Ratio - Dukane 8926H-RJ User Manual

Operating

Searching an input signal

1.
Press SEARCH button on the remote control.
The projector will start to check its input ports as below in
order to find any input signals.
When an input is found, the projector will stop searching
and display the image. If no signal is found, the projector will
return to the state selected before the operation.
COMPUTER IN1  COMPUTER IN2  LAN
VIDEO
S-VIDEO
COMPONENT
● While ON is selected for AUTO SEARCH item in OPTION menu (53), the
projector will keep checking the ports in above order repeatedly till an input
signal is detected.
● It may take several seconds to project the images from the USB TYPE B port.

Selecting an aspect ratio

1.
Press ASPECT button on the remote control.
Each time you press the button, the projector switches the
mode for aspect ratio in turn.
 For a computer signal
8925H-RJ, 8926H-RJ, 8956H-RJ:
 For an HDMI
8925H-RJ, 8926H-RJ, 8956H-RJ:
 For a video signal, s-video signal or component video signal
8925H-RJ, 8926H-RJ, 8956H-RJ:
 For an input signal from the LAN, USB TYPE A or USB TYPE B port, or
if there is no signal
8925H-RJ, 8926H-RJ, 8956H-RJ: 4:3 (fixed)
8927H-RJ: 16:10 (fixed)
● ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
http://www.pureglare.com.au
22
HDMI
NORMAL  4:3  16:9  16:10
signal
TM
NORMAL  4:3  16:9  16:10  14:9
4:3  16:9  14:9
SEARCH button
USB TYPE A
USB TYPE B
ASPECT button
 NATIVE
 NATIVE
 NATIVE
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
MY BUTTON
KEYSTONE MUTE
MENU
POSITION
ENTER
ESC RESET
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO SEARCH BLANK
FREEZE
MAGNIFY PAGE VOLUME
UP
ON
OFF DOWN
MY BUTTON
KEYSTONE MUTE
POSITION MENU
ENTER
ESC
RESET