Table of Contents
Advertisement
OPTION menu
Item
SERVICE
(continued)
(continued on next page)
http://www.pureglare.com.au
60
SERIAL SETTINGS
Select the serial communication condition for the
CONTROL port.
BAUD RATE
PARITY
• The BAUD RATE is fixed to 19200bps
and PARITY is fixed NONE when the
COMMUNICATION TYPE is set to OFF (59).
TRANSMISSION METHOD
COMMUNICATION
Select the transmission method for communication
(continued)
by the NETWORK BRIDGE from the CONTROL
port.
HALF-DUPLEX: This method lets the projector
make two way communication, but only one
direction, either transmitting or receiving data, is
allowed at a time.
FULL-DUPLEX: This method lets the projector
make two way communication, transmitting and
receiving data at the same time.
• HALF-DUPLEX is selected as the default setting.
• If you select HALF-DUPLEX, check the setting of
the item RESPONSE LIMIT TIME (61).
Description
4800bps ó 9600bps ó 19200bps ó 38400bps
NONE ó ODD ó EVEN
HALF-DUPLEX ó FULL-DUPLEX
Advertisement
Table of Contents
