Table of Contents
Advertisement
IMAGE menu
From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
ASPECT
OVER SCAN
(continued on next page)
http://www.pureglare.com.au
Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
8925H-RJ, 8926H-RJ, 8956H-RJ:
NORMAL ó 4:3 ó 16:9 ó 16:10
For an HDMI
signal
TM
8925H-RJ, 8926H-RJ, 8956H-RJ:
NORMAL ó 4:3 ó 16:9 ó 16:10 ó 14:9
For a video signal, s-video signal or component video signal
8925H-RJ, 8926H-RJ, 8956H-RJ:
4:3 ó 16:9 ó 14:9
For an input signal from the LAN, USB TYPE A or USB TYPE B
port, or if there is no signal
8925H-RJ, 8926H-RJ, 8956H-RJ: 4:3 (fixed)
8927HW-RJ: 16:10 (fixed)
• The NORMAL mode keeps the original aspect ratio of the signal.
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture) ó Large (It reduces picture)
• This item can be selected only for a video, s-video and component
video signal.
TM
• For an HDMI
signal, this item can also be selected if either (1) or
(2) applies.
(1) HDMI FORMAT item in the INPUT menu is set to VIDEO.
(2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the
projector recognizes that it receives video signals.
Description
IMAGE menu
ó 14:9 ó NATIVE
35
Advertisement
Table of Contents
