Changing The Frequency Of Remote Control Signal - Dukane 8962WU User Manual

Remote control

Changing the frequency of remote control signal

The accessory remote control has the two choices on signal frequency Mode
1:NORMAL and Mode 2:HIGH. If the remote control does not function properly,
attempt to change the signal frequency.
In order to set the Mode, please keep pressing the combination of two buttons
listed below simultaneously for about 3 seconds.
(1) Set to Mode 1:NORMAL
VOLUME - and RESET buttons
(2) Set to Mode 2:HIGH
MAGNIFY OFF and ESC buttons
Please remember that the REMOTE
FREQ. in the SERVICE item of the OPTION menu (89) of the projector to be
controlled should be set to the same mode as the remote control.
28
(2)
INPUT
ASPECT
MAGNIFY
MAGNIFY
ON
OFF
OFF button
PAGE
UP
DOWN
ESC
ESC
button
OSD MSG
(1)
MYBUTTON
1 2
PbyP AUTO FREEZE
VOLUME -
FOCUS ZOOM VOLUME
+ + +
-
- -
button
GEOMETRY PICTURE MUTE
INTERACTIVE NETWORK BLANK
RESET
MENU
ENTER
button
RESET