Item
AUTO ECO MODE
ECO MODE
MIRROR
(continued on next page)
http://www.pureglare.com.au
Using the ▲/▼ buttons turns on/off the AUTO ECO MODE.
ON ó OFF
• When ON is selected, the projector will always be set to Eco mode
at start-up regardless of the ECO MODE (below) setting. An OSD
message "AUTO ECO MODE" will be displayed for tens of seconds
when the projector starts with this function activated.
Using the ▲/▼ buttons turns off/on the Eco mode.
NORMAL ó ECO
• When the ECO is selected, acoustic noise and screen brightness
are reduced.
• When AUTO ECO MODE (above) is set to ON, the projector will
always be set to Eco mode at start-up regardless this setting.
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT
If the Transition Detector is on and MIRROR status is changed,
TRANSITION DETECTOR ON alarm (77) will be displayed when
projector is restarted after the AC power is turned off.
Description
SETUP menu
43