Chunk Control; Action Control - Omron FS-B4KU7DGES-F Product Specifications And User's Manual

10.17

Chunk Control

This function is attached additional image information to image data.
For example, the exposure time and gain information do not include in image data itself. However, Chunk data
transfers these parameters when image was acquiring.
GenICam Parameters
ChunkModeActive
ChunkSelector
ChunkEnable
ChunkCounterSelector
ChunkGainSelector
ChunkTimerSelector
10.18

Action Control

The multiple cameras control by one action signal.
GenICam Parameters
ActionDeviceKey
ActionQueueSize
ActionSelector
ActionGroupKey
ActionGroupMask
FS-B4KU7DGES-F / FS-B4KU7DGES-M42 / FS-B2KU7DGES-F / FS-B2KU7DGES-M42 / FS-B2KU7DGES-C
Product Specifications and Use's Guide
IBoolean Type Chunk control ON / OFF selection
Selection: "False" (Off), "True" (On)
Default: "False" (Off)
IEnumeration Transfer Chunk data selection
Type Selection: Image, "CounterValue, Gain, ExposureTime, LineStatusAll,
IBoolean Type Enable Chunk data that was selected at "Chunk Selector"
Selection: "True" (Enable Chunk data) and "False" (Disable Chunk
data)
IEnumeration CounterValue selection
Type Selection: Counter0, Counter1
Default: Counter0
IEnumeration Gain selection
Type Selection: AnalogAll, DigitalAll
Default: AnalogAll
IEnumeration Timer selection
Type Selecrion: Timer0, Timer1
Default: Timer0
IInteger Type Control identifier of camera
IInteger Type Size of scheduled action command queue
IInteger Type Action command application selection
Fixed as "0"
IInteger Type Action command applies camera
* The camera executes action command when group key of action
command and group key of camera is matched.
IInteger Type Select camera to apply action command
Logical AND of Group Mask of camera and Group Mask of action
command is 1 for any bit of 32bits, camera executes action command.
TimerValue, DeviceTemperature
No.20S048-00
45/62