Oki LP-1040 Installation Manual page 66

7
8
Feed out the roll paper by 60 cm (23.62 inches).
If the paper is not fed sufficiently, the tape paste will adhere to the drum and other parts,
which causes paper jams, etc.
60cm
(23.62 inches)
9
OKI Data Infotech Corporation CONFIDENTIAL
Insert the end of the roll paper inside the
paper inlet.
Turn the paper feed knob and feed the roll
paper so that its top protrude from the Printer
by approximately 60 cm.
While holding the end of the roll paper, cut
the paper with the cutter.
8-6
Chapter 8 Handover